The mechanical behavior of a screwless morse taper implant–abutment connection: An in vitro study
Abstract: The use of screwless Morse taper implant–abutment connections (IAC) might facilitate the clinician’s work by eliminating the mechanical complications associated with the retention screw. The aim of this study is to evaluate the effect of artificial chewing on the long-term stability of screwless Morse taper IACs. Thirty-two implant abutments restored with an upper central incisor zirconia crown were used and divided into four groups according to the implant–abutment assembling manner (C1,H: screw retained (20 Ncm); C2: tapped; or C3: torqued (20 Ncm; the screws were removed before the dynamic loading)). All specimens were subjected to a cyclic loading (98 N) for 10 million chewing cycles. The survived samples were exposed to a pull-off force until failure/disassembling of the connection. All the samples revealed a 100% survival. Regarding the pull-off test, the screw-retained internal hexagonal IAC revealed significantly higher resistance to failure/disassembling (769.6 N) than screwless conical IACs (171.6 N–246 N) (p < 0.0001). The retention forces in the Morse taper groups were not significantly different (p > 0.05). The screw-retained hexagonal IAC showed the highest retention stability. The screw preload/retention in the conical IAC was lost over time in the group where the screws were kept in place during loading. Nevertheless, the screwless Morse taper IACs were stable for an extended service time and might represent a valid form of treatment for single-tooth replacement
- Standort
-
Deutsche Nationalbibliothek Frankfurt am Main
- Umfang
-
Online-Ressource
- Sprache
-
Englisch
- Anmerkungen
-
Materials. - 15, 9 (2022) , 3381, ISSN: 1996-1944
- Ereignis
-
Veröffentlichung
- (wo)
-
Freiburg
- (wer)
-
Universität
- (wann)
-
2022
- Urheber
- DOI
-
10.3390/ma15093381
- URN
-
urn:nbn:de:bsz:25-freidok-2268798
- Rechteinformation
-
Open Access; Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Letzte Aktualisierung
-
15.08.2025, 07:34 MESZ
Datenpartner
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Beteiligte
- Bagegni, Aimen
- Weihrauch, Vincent
- Vach, Kirstin
- Kohal, Ralf-Joachim
- Universität
Entstanden
- 2022
Ähnliche Objekte (12)
Computerized optical impression making of fully dentate upper and lower jaws: an in vitro study
Influence of loading and aging on the fracture strength of an injection‐molded two‐piece zirconia implant restored with a zirconia abutment
Accuracy of computerized optical impression making in fabrication of removable dentures for partially edentulous jaws: an in vivo feasibility study
The clinical performance of all-ceramic implant-supported single crowns : : a systematic review and meta-analysis
Survival, technical and biological outcome of fixed tooth- and implant-supported restorations: a retrospective analysis of a patient cohort treated in an undergraduate dental education program
A prospective clinical cohort investigation on zirconia implants: 5-year results
Clinical outcomes of partial and full-arch all-ceramic implant-supported fixed dental prostheses. A systematic review and meta-analysis
A novel zirconia-based composite presents an aging resistant material for narrow-diameter ceramic implants
One-Piece Zirconia Oral Implants for the Support of Three-Unit Fixed Dental Prostheses: Three-Year Results from a Prospective Case Series
Does oral implant design affect marginal bone loss? Results of a parallel-group randomized controlled equivalence trial
Effects of a disability‐simulating learning unit on ableism of final‐year dental students – a pilot study
Bonding strength of various luting agents between zirconium dioxide crowns and titanium bonding bases after long-term artificial chewing
Computerized optical impression making of fully dentate upper and lower jaws: an in vitro study
Influence of loading and aging on the fracture strength of an injection‐molded two‐piece zirconia implant restored with a zirconia abutment
Accuracy of computerized optical impression making in fabrication of removable dentures for partially edentulous jaws: an in vivo feasibility study
The clinical performance of all-ceramic implant-supported single crowns : : a systematic review and meta-analysis
Survival, technical and biological outcome of fixed tooth- and implant-supported restorations: a retrospective analysis of a patient cohort treated in an undergraduate dental education program
A prospective clinical cohort investigation on zirconia implants: 5-year results
Clinical outcomes of partial and full-arch all-ceramic implant-supported fixed dental prostheses. A systematic review and meta-analysis
A novel zirconia-based composite presents an aging resistant material for narrow-diameter ceramic implants
One-Piece Zirconia Oral Implants for the Support of Three-Unit Fixed Dental Prostheses: Three-Year Results from a Prospective Case Series
Does oral implant design affect marginal bone loss? Results of a parallel-group randomized controlled equivalence trial
Effects of a disability‐simulating learning unit on ableism of final‐year dental students – a pilot study
Bonding strength of various luting agents between zirconium dioxide crowns and titanium bonding bases after long-term artificial chewing
Computerized optical impression making of fully dentate upper and lower jaws: an in vitro study
Influence of loading and aging on the fracture strength of an injection‐molded two‐piece zirconia implant restored with a zirconia abutment
Accuracy of computerized optical impression making in fabrication of removable dentures for partially edentulous jaws: an in vivo feasibility study
The clinical performance of all-ceramic implant-supported single crowns : : a systematic review and meta-analysis
Survival, technical and biological outcome of fixed tooth- and implant-supported restorations: a retrospective analysis of a patient cohort treated in an undergraduate dental education program
A prospective clinical cohort investigation on zirconia implants: 5-year results
Clinical outcomes of partial and full-arch all-ceramic implant-supported fixed dental prostheses. A systematic review and meta-analysis
A novel zirconia-based composite presents an aging resistant material for narrow-diameter ceramic implants
One-Piece Zirconia Oral Implants for the Support of Three-Unit Fixed Dental Prostheses: Three-Year Results from a Prospective Case Series
Does oral implant design affect marginal bone loss? Results of a parallel-group randomized controlled equivalence trial
Effects of a disability‐simulating learning unit on ableism of final‐year dental students – a pilot study