Effect of sodium bicarbonate air abrasive polishing on resistance to sliding during tooth alignment and leveling: An in vitro study
Abstract: Objective: The aim of this in vitro study was to evaluate the Resistance to Sliding (RS) provided by metallic brackets and 3 types of orthodontic wires (TMA, SS and NiTi), before and after the use of sodium bicarbonate airborne particle abrasion, in an experimental model with 3 non leveled brackets. Materials and Methods: The bicarbonate airborne abrasion was applied perpendicularly to the bracket slots at a distance of 2 mm, for 5 seconds (T2) and 10 seconds (T3) on each bracket slot. In a universal testing machine, the wires were pulled through a set of 3 non leveled brackets at a cross head speed of 50 mm/min for a distance of 10 mm, and static and kinetic friction readings were registered at T1 (no airborne abrasion), T2 and T3. Results: For all tested wires, a significant RS increase between T1 and T3 (P<0.001) was seen. For SS and TMA wires, there was a statistically significant RS increase between T1 and T2 (P<0.001). Between T2 and T3, RS increase was significant for TMA (P<0.001) and NiTiwires (P<0.05). Conclusions: Sodium bicarbonate air abrasive polishing during orthodontic treatment is not recommended, once this procedure promoted a significant RS increase between the metallic brackets and all the three types of wires tested.
- Location
-
Deutsche Nationalbibliothek Frankfurt am Main
- Extent
-
Online-Ressource
- Language
-
Englisch
- Bibliographic citation
-
Effect of sodium bicarbonate air abrasive polishing on resistance to sliding during tooth alignment and leveling: An in vitro study ; volume:1 ; number:02 ; year:2012 ; pages:78-84
European journal of general dentistry ; 1, Heft 02 (2012), 78-84
- Contributor
-
Filho, Jorge C. B. L.
Consolmagno, Andressa V.
de Araújo, Cristiano M.
Brunet, Marcel D.
Rosa, Edvaldo A. R.
Tanaka, Orlando M.
- DOI
-
10.4103/2278-9626.103381
- URN
-
urn:nbn:de:101:1-2021121610503389178005
- Rights
-
Open Access; Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Last update
-
15.08.2025, 7:30 AM CEST
Data provider
Deutsche Nationalbibliothek. If you have any questions about the object, please contact the data provider.
Associated
- Filho, Jorge C. B. L.
- Consolmagno, Andressa V.
- de Araújo, Cristiano M.
- Brunet, Marcel D.
- Rosa, Edvaldo A. R.
- Tanaka, Orlando M.
Other Objects (12)
Sliding abrasive wear when combining WEDM conditions and polishing treatment on H13 disks over 1045 carbon steel pins
Abrasive wear behavior of PTFE for seal applications under abrasive-atmosphere sliding condition
Constrained abrasive jet polishing with a tangentially aligned nozzle shroud
Abrasive-free polishing of hard disk substrate with H2O2-C4H10O2-Na2S2O5 slurry
Approach for Polishing Diamond Coated Complicated Cutting Tool: Abrasive Flow Machining (AFM)
Experimental study on polishing performance of CeO2 and nano-SiO2 mixed abrasive
Effect of Micro Abrasive Slurry Jet Polishing on Properties of Coated Cemented Carbide Tools
Comparative Analysis of Abrasive Materials and Polishing System on the Surface Roughness of Heat-Polymerized Acrylic Resins
Brass-polishing.
Optimization of process parameters for polishing aero-engine blade with abrasive cloth wheel considering spindle vibration and polished roughness
The working angle in low-abrasive air polishing has an influence on gingival damage—an ex vivo porcine model
Fuzzy Sliding Mode Control for the Vehicle Height and Leveling Adjustment System of an Electronic Air Suspension
Sliding abrasive wear when combining WEDM conditions and polishing treatment on H13 disks over 1045 carbon steel pins
Abrasive wear behavior of PTFE for seal applications under abrasive-atmosphere sliding condition
Constrained abrasive jet polishing with a tangentially aligned nozzle shroud
Abrasive-free polishing of hard disk substrate with H2O2-C4H10O2-Na2S2O5 slurry
Approach for Polishing Diamond Coated Complicated Cutting Tool: Abrasive Flow Machining (AFM)
Experimental study on polishing performance of CeO2 and nano-SiO2 mixed abrasive
Effect of Micro Abrasive Slurry Jet Polishing on Properties of Coated Cemented Carbide Tools
Comparative Analysis of Abrasive Materials and Polishing System on the Surface Roughness of Heat-Polymerized Acrylic Resins
Brass-polishing.
Optimization of process parameters for polishing aero-engine blade with abrasive cloth wheel considering spindle vibration and polished roughness
The working angle in low-abrasive air polishing has an influence on gingival damage—an ex vivo porcine model
Fuzzy Sliding Mode Control for the Vehicle Height and Leveling Adjustment System of an Electronic Air Suspension
Sliding abrasive wear when combining WEDM conditions and polishing treatment on H13 disks over 1045 carbon steel pins
Abrasive wear behavior of PTFE for seal applications under abrasive-atmosphere sliding condition
Constrained abrasive jet polishing with a tangentially aligned nozzle shroud
Abrasive-free polishing of hard disk substrate with H2O2-C4H10O2-Na2S2O5 slurry
Approach for Polishing Diamond Coated Complicated Cutting Tool: Abrasive Flow Machining (AFM)
Experimental study on polishing performance of CeO2 and nano-SiO2 mixed abrasive
Effect of Micro Abrasive Slurry Jet Polishing on Properties of Coated Cemented Carbide Tools
Comparative Analysis of Abrasive Materials and Polishing System on the Surface Roughness of Heat-Polymerized Acrylic Resins
Brass-polishing.
Optimization of process parameters for polishing aero-engine blade with abrasive cloth wheel considering spindle vibration and polished roughness
The working angle in low-abrasive air polishing has an influence on gingival damage—an ex vivo porcine model