Kinetics of Iron Removal From Ti-Extraction Blast Furnace Slag by Chlorination Calcination
Abstract: In this research, ammonium chloride was used to calcine Ti-extraction blast furnace slag (EBFS) with the aim of removing iron from it. The influences of calcination temperature, ammonium chloride to EBFS mass ratio and particle size on the rates of iron removal were investigated. The results show that the rate of iron removal increased to almost 100% with increases in calcination temperature and the NH4Cl to EBFS mass ratio, but decreased with increases in particle size. Iron is removed in the form of ferric chloride gas, and ammonium chloride can be recycled by recrystallization after decomposition. The bagdasarrym model was used to describe the calcination process at temperatures below 261°C, which was controlled by nonisothermal crystallization. The reaction kinetic equation was obtained and the apparent activation energy of 67.21 kJ/mol. Ferric chloride reaction product existed in the calcined slag in an amorphous solid state. The shrinking core model was used to describe the calcination process at temperatures above 261°C, which was controlled by surface chemical reactions. The reaction kinetic equation was obtained and the apparent activation energy was found to be 42.05 kJ/mol.
- Standort
-
Deutsche Nationalbibliothek Frankfurt am Main
- Umfang
-
Online-Ressource
- Sprache
-
Englisch
- Erschienen in
-
Kinetics of Iron Removal From Ti-Extraction Blast Furnace Slag by Chlorination Calcination ; volume:17 ; number:1 ; year:2019 ; pages:1146-1156 ; extent:11
Open chemistry ; 17, Heft 1 (2019), 1146-1156 (gesamt 11)
- Urheber
-
He, Siqi
Peng, Tongjiang
Sun, Hongjuan
Luo, Dongshan
Xiao, Qing
Geng, Qian
- DOI
-
10.1515/chem-2019-0124
- URN
-
urn:nbn:de:101:1-2410161630136.027624684531
- Rechteinformation
-
Open Access; Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Letzte Aktualisierung
-
15.08.2025, 07:20 MESZ
Datenpartner
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Beteiligte
- He, Siqi
- Peng, Tongjiang
- Sun, Hongjuan
- Luo, Dongshan
- Xiao, Qing
- Geng, Qian
Ähnliche Objekte (12)
Zinc Fuming from Lead Blast Furnace Slag
Carbothermic Reduction of Titanium-Bearing Blast Furnace Slag
The Quantitative Effect of Blast Furnace Slag Composition and Temperature on the Kinetics of Potassium Evaporation
Durability Properties and Microstructure of Ground Granulated Blast Furnace Slag Cement Concrete
Investigation of Phosphate Removal Capability of Blast Furnace Slag in Wastewater Treatment
Optimization of heat treatment of glass-ceramics made from blast furnace slag
Equilibrium, kinetics, and thermodynamics of batch adsorption of Mn(II) ions on blast furnace slag (BFS) and kaolin (KGA)
Kinetic studies of Ni(II) ions adsorption from aqueous solutions using the blast furnace slag (BF slag)
Mechanical properties and permeability of red mud-blast furnace slag-based geopolymer concrete
The Effect of Acidity Coefficient on Crystallization Behavior of Blast Furnace Slag Fibers
Utilization of basalt fabrics as reinforcement for alkali-activated blast furnace slag systems
Evaluation of copper slag and stainless steel slag as replacements for blast furnace slag in binary and ternary alkali-activated cements
Zinc Fuming from Lead Blast Furnace Slag
Carbothermic Reduction of Titanium-Bearing Blast Furnace Slag
The Quantitative Effect of Blast Furnace Slag Composition and Temperature on the Kinetics of Potassium Evaporation
Durability Properties and Microstructure of Ground Granulated Blast Furnace Slag Cement Concrete
Investigation of Phosphate Removal Capability of Blast Furnace Slag in Wastewater Treatment
Optimization of heat treatment of glass-ceramics made from blast furnace slag
Equilibrium, kinetics, and thermodynamics of batch adsorption of Mn(II) ions on blast furnace slag (BFS) and kaolin (KGA)
Kinetic studies of Ni(II) ions adsorption from aqueous solutions using the blast furnace slag (BF slag)
Mechanical properties and permeability of red mud-blast furnace slag-based geopolymer concrete
The Effect of Acidity Coefficient on Crystallization Behavior of Blast Furnace Slag Fibers
Utilization of basalt fabrics as reinforcement for alkali-activated blast furnace slag systems
Evaluation of copper slag and stainless steel slag as replacements for blast furnace slag in binary and ternary alkali-activated cements
Zinc Fuming from Lead Blast Furnace Slag
Carbothermic Reduction of Titanium-Bearing Blast Furnace Slag
The Quantitative Effect of Blast Furnace Slag Composition and Temperature on the Kinetics of Potassium Evaporation
Durability Properties and Microstructure of Ground Granulated Blast Furnace Slag Cement Concrete
Investigation of Phosphate Removal Capability of Blast Furnace Slag in Wastewater Treatment
Optimization of heat treatment of glass-ceramics made from blast furnace slag
Equilibrium, kinetics, and thermodynamics of batch adsorption of Mn(II) ions on blast furnace slag (BFS) and kaolin (KGA)
Kinetic studies of Ni(II) ions adsorption from aqueous solutions using the blast furnace slag (BF slag)
Mechanical properties and permeability of red mud-blast furnace slag-based geopolymer concrete
The Effect of Acidity Coefficient on Crystallization Behavior of Blast Furnace Slag Fibers
Utilization of basalt fabrics as reinforcement for alkali-activated blast furnace slag systems