Evaluation of the bonding strength between yttrium-stabilized zirconia and coating ceramics with three-point flexural Test: The surface treatment effect
Abstract: Aim: This study aimed at evaluating with the three-point flexural test, the bonding strength of tetragonal zirconia polycrystalline stabilized by yttria zirkonzahn (Y-TZP) and two coating ceramics (Ice e Vision Zircon), with two surface treatments (treated and untreated). Materials and Methods: Forty Y-TZP bars were divided into four groups (n = 10): vision zircon/without treatment (VZ/woT), vision zircon/with treatment (VZ/wT), ice/without treatment, and ice/with treatment (I/wT). The flexural strength assay was conducted using a 50 N load cell and 1 mm/min speed. Results were analyzed with one-factor ANOVA, two-factor ANOVA, and Tukey’s test (α = 0.05). Results: The treatment surface of Y-TZP affected significantly the bonding strength (P = 0.019), with higher values in VZ/woT group in comparison with the groups VZ/wT (P = 0.027) e I/wT (P = 0.034). The variable “coating ceramic” was not statistically significant (P = 0.138), on the other hand, the variable “surface treatment” significantly decreased the strength values when vision zircon ceramics was used (P = 0.018). Conclusion: This study concluded that the use of the evaluated ceramics did not influence the bond strength and the surface treatment decreased strength depending on the coating ceramics.
- Standort
-
Deutsche Nationalbibliothek Frankfurt am Main
- Umfang
-
Online-Ressource
- Sprache
-
Englisch
- Erschienen in
-
Evaluation of the bonding strength between yttrium-stabilized zirconia and coating ceramics with three-point flexural Test: The surface treatment effect ; volume:7 ; number:01 ; year:2018 ; pages:14-18
European journal of general dentistry ; 7, Heft 01 (2018), 14-18
- Beteiligte Personen und Organisationen
-
Felipe, Anderson Fernandes
Miranda Coimbra, Walace Henry
Pinheiro Carvalho, Geraldo Alberto
Kreve, Simone
Gonçalves Franco, Aline Batista
Dias, Sergio Cândido
- DOI
-
10.4103/ejgd.ejgd_100_17
- URN
-
urn:nbn:de:101:1-2021121611303411178716
- Rechteinformation
-
Open Access; Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Letzte Aktualisierung
-
15.08.2025, 07:31 MESZ
Datenpartner
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Beteiligte
- Felipe, Anderson Fernandes
- Miranda Coimbra, Walace Henry
- Pinheiro Carvalho, Geraldo Alberto
- Kreve, Simone
- Gonçalves Franco, Aline Batista
- Dias, Sergio Cândido
Ähnliche Objekte (12)
Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns
Color Characteristics of High Yttrium Oxide–Doped Monochrome and Multilayer Partially Stabilized Zirconia upon Different Sintering Parameters
Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres
Oxygen diffusion in nanocrystalline yttria-stabilized zirconia
Biaxial Flexural Strength of Different Monolithic Zirconia upon Post-Sintering Processes
Flexural failure properties of fiber-reinforced hybrid laminated beam subject to three-point bending
High-temperature stable Zirconia particles doped with Yttrium, Lanthanum, and Gadolinium
Effect of Grinding and Polishing Protocols on Surface Roughness, Flexural Strength, and Phase Transformation of High-Translucent 5 mol% Yttria-Partially Stabilized Zirconia
Local electrical and dielectric properties of nanocrystalline yttria-stabilized zirconia
Oxygen Liberation from Stabilized Zirconia upon Changing DC Polarization Condition
Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering
The impact of aging and thickness on flexural strength of various zirconia ceramics
Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns
Color Characteristics of High Yttrium Oxide–Doped Monochrome and Multilayer Partially Stabilized Zirconia upon Different Sintering Parameters
Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres
Oxygen diffusion in nanocrystalline yttria-stabilized zirconia
Biaxial Flexural Strength of Different Monolithic Zirconia upon Post-Sintering Processes
Flexural failure properties of fiber-reinforced hybrid laminated beam subject to three-point bending
High-temperature stable Zirconia particles doped with Yttrium, Lanthanum, and Gadolinium
Effect of Grinding and Polishing Protocols on Surface Roughness, Flexural Strength, and Phase Transformation of High-Translucent 5 mol% Yttria-Partially Stabilized Zirconia
Local electrical and dielectric properties of nanocrystalline yttria-stabilized zirconia
Oxygen Liberation from Stabilized Zirconia upon Changing DC Polarization Condition
Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering
The impact of aging and thickness on flexural strength of various zirconia ceramics
Quantum mechanical analysis of yttrium-stabilized zirconia and alumina: implications for mechanical performance of esthetic crowns
Color Characteristics of High Yttrium Oxide–Doped Monochrome and Multilayer Partially Stabilized Zirconia upon Different Sintering Parameters
Synthesis and thermal stability of zirconia and yttria-stabilized zirconia microspheres
Oxygen diffusion in nanocrystalline yttria-stabilized zirconia
Biaxial Flexural Strength of Different Monolithic Zirconia upon Post-Sintering Processes
Flexural failure properties of fiber-reinforced hybrid laminated beam subject to three-point bending
High-temperature stable Zirconia particles doped with Yttrium, Lanthanum, and Gadolinium
Effect of Grinding and Polishing Protocols on Surface Roughness, Flexural Strength, and Phase Transformation of High-Translucent 5 mol% Yttria-Partially Stabilized Zirconia
Local electrical and dielectric properties of nanocrystalline yttria-stabilized zirconia
Oxygen Liberation from Stabilized Zirconia upon Changing DC Polarization Condition
Flexural strength, flexural modulus and microhardness of milled vs. fused deposition modeling printed Zirconia; effect of conventional vs. speed sintering