Influence of polymer fibers on rheological properties of cement mortars
Abstract: The reinforcing effect of fibers in cement composites often results in the improvement of the brittle nature of cementitious materials. But the decrease in the workability of fresh concrete is often the disadvantage of fibers addition. Conventional single-point workability tests cannot characterize workability of concrete in terms of fundamental rheological parameters. To this end, this paper describes an investigation of the influence of synthetic fiber additions (fiber length in the range 12–50 mm and volume fraction in the range 0–4%) on the rheological properties of fiber reinforced fresh mortar (FRFM) and development of these properties over time. The rheometer Viskomat XL was used in this study. Within the limitations of the instrument and testing procedure it is shown that FRFMs conform to the Bingham model. Natural postglacial sand 0/4 mm was used as a fine aggregate and cement CEMI 42.5 R was used as a binder. Three commercial synthetic fibers were selected for these examinations. Rheological properties were expressed in terms of Bingham model parameters g (yield value) and h (plastic viscosity). Based on the test results it was found out that the fiber type and volume fraction affected both the yield stress and plastic viscosity.
- Standort
-
Deutsche Nationalbibliothek Frankfurt am Main
- Umfang
-
Online-Ressource
- Sprache
-
Englisch
- Erschienen in
-
Influence of polymer fibers on rheological properties of cement mortars ; volume:7 ; number:1 ; year:2017 ; pages:228-236 ; extent:9
Open engineering ; 7, Heft 1 (2017), 228-236 (gesamt 9)
- Urheber
-
Malaszkiewicz, Dorota
- DOI
-
10.1515/eng-2017-0029
- URN
-
urn:nbn:de:101:1-2412141613301.948891692906
- Rechteinformation
-
Open Access; Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Letzte Aktualisierung
-
15.08.2025, 07:31 MESZ
Datenpartner
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Beteiligte
- Malaszkiewicz, Dorota
Ähnliche Objekte (12)
Reinforcement of cementitious mortars with hemp fibers and shives
Utilization of nanoparticles and waste materials in cement mortars
Thermal Action on Normal and High Strength Cement Mortars
Relevant biochar characteristics influencing compressive strength of biochar-cement mortars
Impact of virgin and recycled polymer fibers on the rheological properties of cemented paste backfill
Effect of material and technological factors on the properties of cement-lime mortars and mortars with plasticizing admixture
Degradation of limestone calcined clay cement (LC3) mortars under sulfate attack
Comparison of reinforcement fibers in 3D printing mortars using multi-criteria analysis
Production of Cement mortars from glass powder and municipal incinerated bottom ash
Crack mode analysis of cement mortars with signal - based acoustic emission techniques
Influence of Nano-silica on the Leaching Attack upon Photocatalytic Cement Mortars
Durability of the Reinforced One-Part Alkali-Activated Slag Mortars with Different Fibers
Reinforcement of cementitious mortars with hemp fibers and shives
Utilization of nanoparticles and waste materials in cement mortars
Thermal Action on Normal and High Strength Cement Mortars
Relevant biochar characteristics influencing compressive strength of biochar-cement mortars
Impact of virgin and recycled polymer fibers on the rheological properties of cemented paste backfill
Effect of material and technological factors on the properties of cement-lime mortars and mortars with plasticizing admixture
Degradation of limestone calcined clay cement (LC3) mortars under sulfate attack
Comparison of reinforcement fibers in 3D printing mortars using multi-criteria analysis
Production of Cement mortars from glass powder and municipal incinerated bottom ash
Crack mode analysis of cement mortars with signal - based acoustic emission techniques
Influence of Nano-silica on the Leaching Attack upon Photocatalytic Cement Mortars
Durability of the Reinforced One-Part Alkali-Activated Slag Mortars with Different Fibers
Reinforcement of cementitious mortars with hemp fibers and shives
Utilization of nanoparticles and waste materials in cement mortars
Thermal Action on Normal and High Strength Cement Mortars
Relevant biochar characteristics influencing compressive strength of biochar-cement mortars
Impact of virgin and recycled polymer fibers on the rheological properties of cemented paste backfill
Effect of material and technological factors on the properties of cement-lime mortars and mortars with plasticizing admixture
Degradation of limestone calcined clay cement (LC3) mortars under sulfate attack
Comparison of reinforcement fibers in 3D printing mortars using multi-criteria analysis
Production of Cement mortars from glass powder and municipal incinerated bottom ash
Crack mode analysis of cement mortars with signal - based acoustic emission techniques
Influence of Nano-silica on the Leaching Attack upon Photocatalytic Cement Mortars