Three-dimensional multi-physical modelling of the influence of the cutting fluid on the chip formation process
- Standort
-
Deutsche Nationalbibliothek Frankfurt am Main
- Umfang
-
Online-Ressource
- Sprache
-
Englisch
- Erschienen in
-
In: 10.1016/j.procir.2021.09.037
- Ereignis
-
Veröffentlichung
- (wo)
-
Aachen
- (wer)
-
Universitätsbibliothek der RWTH Aachen
- (wann)
-
2021
- Urheber
- DOI
-
10.18154/RWTH-2022-04887
- URN
-
urn:nbn:de:101:1-2022051803312459183701
- Rechteinformation
-
Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Letzte Aktualisierung
-
15.08.2025, 07:37 MESZ
Datenpartner
Dieses Objekt wird bereitgestellt von:
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Beteiligte
- Liu, Hui
- Peng, Bingxiao
- Meurer, Markus Joachim
- Schraknepper, Daniel
- Bergs, Thomas
- Universitätsbibliothek der RWTH Aachen
Entstanden
- 2021
Ähnliche Objekte (12)
Modeling and monitoring of the tool temperature during continuous and interrupted turning with cutting fluid
Three-Dimensional Modeling of Thermomechanical Tool Loads During Milling Using the Coupled Eulerian-Lagrangian Formulation
A three-dimensional analytical model for transient tool temperature in cutting processes considering convection
Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid–structure interaction (FSI) simulation
Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid–structure interaction (FSI) simulation
Experimental and Finite Element Analysis of adapted cutting fluid supply on tool temperature and wear progression in Inconel 718 turning
Investigations on the Impact of Additively Manufactured Coolant Channels and Outlet Nozzles on Free Jet and Jet Forces in High-Pressure Cutting Fluid Supply
An inverse method for automatic determination of material models for metal cutting based on multi-objective optimization
An inverse method for automatic determination of material models for metal cutting based on multi-objective optimization
Investigation of residual stresses and workpiece distortion during high-feed milling of slender stainless steel components
Numerical Investigation of Convective Heat Transfer during Orthogonal Cutting Processes
Numerical and experimental determination of contact heat transfer during orthogonal cutting
Modeling and monitoring of the tool temperature during continuous and interrupted turning with cutting fluid
Three-Dimensional Modeling of Thermomechanical Tool Loads During Milling Using the Coupled Eulerian-Lagrangian Formulation
A three-dimensional analytical model for transient tool temperature in cutting processes considering convection
Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid–structure interaction (FSI) simulation
Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid–structure interaction (FSI) simulation
Experimental and Finite Element Analysis of adapted cutting fluid supply on tool temperature and wear progression in Inconel 718 turning
Investigations on the Impact of Additively Manufactured Coolant Channels and Outlet Nozzles on Free Jet and Jet Forces in High-Pressure Cutting Fluid Supply
An inverse method for automatic determination of material models for metal cutting based on multi-objective optimization
An inverse method for automatic determination of material models for metal cutting based on multi-objective optimization
Investigation of residual stresses and workpiece distortion during high-feed milling of slender stainless steel components
Numerical Investigation of Convective Heat Transfer during Orthogonal Cutting Processes
Numerical and experimental determination of contact heat transfer during orthogonal cutting
Modeling and monitoring of the tool temperature during continuous and interrupted turning with cutting fluid
Three-Dimensional Modeling of Thermomechanical Tool Loads During Milling Using the Coupled Eulerian-Lagrangian Formulation
A three-dimensional analytical model for transient tool temperature in cutting processes considering convection
Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid–structure interaction (FSI) simulation
Investigation of the cutting fluid’s flow and its thermomechanical effect on the cutting zone based on fluid–structure interaction (FSI) simulation
Experimental and Finite Element Analysis of adapted cutting fluid supply on tool temperature and wear progression in Inconel 718 turning
Investigations on the Impact of Additively Manufactured Coolant Channels and Outlet Nozzles on Free Jet and Jet Forces in High-Pressure Cutting Fluid Supply
An inverse method for automatic determination of material models for metal cutting based on multi-objective optimization
An inverse method for automatic determination of material models for metal cutting based on multi-objective optimization
Investigation of residual stresses and workpiece distortion during high-feed milling of slender stainless steel components
Numerical Investigation of Convective Heat Transfer during Orthogonal Cutting Processes