Determination of corresponding temperature distribution within CFRP during laser cutting
- Standort
-
Deutsche Nationalbibliothek Frankfurt am Main
- Umfang
-
Online-Ressource
- Sprache
-
Englisch
- Erschienen in
-
In: Bluemel, S.; Staehr, R.; Jaeschke, P.; Stute, U.: Determination of corresponding temperature distribution within CFRP during laser cutting. In: Physics Procedia 41 (2013), S. 408-414. DOI: https://doi.org/10.1016/j.phpro.2013.03.095
- Ereignis
-
Veröffentlichung
- (wo)
-
Hannover
- (wer)
-
Gottfried Wilhelm Leibniz Universität Hannover
- (wann)
-
2013
- Ereignis
-
Veröffentlichung
- (wo)
-
Hannover
- (wer)
-
Technische Informationsbibliothek (TIB)
- (wann)
-
2013
- Urheber
-
Bluemel, S.
Staehr, R.
Jaeschke, P.
Stute, U.
- DOI
-
10.15488/4589
- URN
-
urn:nbn:de:101:1-2020081207405268626994
- Rechteinformation
-
Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Letzte Aktualisierung
-
14.08.2025, 10:51 MESZ
Datenpartner
Dieses Objekt wird bereitgestellt von:
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Beteiligte
- Bluemel, S.
- Staehr, R.
- Jaeschke, P.
- Stute, U.
- Gottfried Wilhelm Leibniz Universität Hannover
- Technische Informationsbibliothek (TIB)
Entstanden
- 2013
Ähnliche Objekte (12)
Influence of laser cutting parameters on CFRP part quality
Finite Element Simulation and Experimental Assessment of Laser Cutting Unidirectional CFRP at Cutting Angles of 45° and 90°
Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses
Effects on Process Forces of Individual Milling Tool Edges Depending on the Cutting Angle and Cutting Speed When Milling Cfrp
An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations
Feasibility study of adhesively bonded drills with a small diameter for cutting of CFRP
Investigation on cutting of CFRP composite by nanosecond short-pulsed laser with rotary drilling method
Analysis and Modeling of Heat Flux into the Tool in Abrasive Circular Cutting of Unidirectional CFRP
Optimising process efficiency during remote laser cutting of CFRP by utilisation of a double-scan-head
Influence of fibre orientation on cutting force in up and down milling of UD-CFRP composites
Interaction mechanisms and damage formation in laser cutting of CFRP laminates obtained by recycled carbon fibre
TIMESTAMP OFFSET DETERMINATION BETWEEN AN ACTUATED LASER SCANNER AND ITS CORRESPONDING MOTOR
Influence of laser cutting parameters on CFRP part quality
Finite Element Simulation and Experimental Assessment of Laser Cutting Unidirectional CFRP at Cutting Angles of 45° and 90°
Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses
Effects on Process Forces of Individual Milling Tool Edges Depending on the Cutting Angle and Cutting Speed When Milling Cfrp
An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations
Feasibility study of adhesively bonded drills with a small diameter for cutting of CFRP
Investigation on cutting of CFRP composite by nanosecond short-pulsed laser with rotary drilling method
Analysis and Modeling of Heat Flux into the Tool in Abrasive Circular Cutting of Unidirectional CFRP
Optimising process efficiency during remote laser cutting of CFRP by utilisation of a double-scan-head
Influence of fibre orientation on cutting force in up and down milling of UD-CFRP composites
Interaction mechanisms and damage formation in laser cutting of CFRP laminates obtained by recycled carbon fibre
TIMESTAMP OFFSET DETERMINATION BETWEEN AN ACTUATED LASER SCANNER AND ITS CORRESPONDING MOTOR
Influence of laser cutting parameters on CFRP part quality
Finite Element Simulation and Experimental Assessment of Laser Cutting Unidirectional CFRP at Cutting Angles of 45° and 90°
Influence of cemented carbide composition on cutting temperatures and corresponding hot hardnesses
Effects on Process Forces of Individual Milling Tool Edges Depending on the Cutting Angle and Cutting Speed When Milling Cfrp
An experimental study on abrasive waterjet cutting of CFRP/Ti6Al4V stacks for drilling operations
Feasibility study of adhesively bonded drills with a small diameter for cutting of CFRP
Investigation on cutting of CFRP composite by nanosecond short-pulsed laser with rotary drilling method
Analysis and Modeling of Heat Flux into the Tool in Abrasive Circular Cutting of Unidirectional CFRP
Optimising process efficiency during remote laser cutting of CFRP by utilisation of a double-scan-head
Influence of fibre orientation on cutting force in up and down milling of UD-CFRP composites
Interaction mechanisms and damage formation in laser cutting of CFRP laminates obtained by recycled carbon fibre