Influence of surface treatments on the fatigue strength of cross bores in shafts from EN-GJS700-2
- Standort
-
Deutsche Nationalbibliothek Frankfurt am Main
- Umfang
-
Online-Ressource
- Sprache
-
Englisch
- Anmerkungen
-
In: 10.21741/9781644903131-306
- Ereignis
-
Veröffentlichung
- (wo)
-
Aachen
- (wer)
-
Universitätsbibliothek der RWTH Aachen
- (wann)
-
2024
- Urheber
- DOI
-
10.18154/RWTH-2024-07301
- URN
-
urn:nbn:de:101:1-2408080144545.730370204619
- Rechteinformation
-
Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Letzte Aktualisierung
-
14.08.2025, 10:59 MESZ
Datenpartner
Dieses Objekt wird bereitgestellt von:
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Deutsche Nationalbibliothek. Bei Fragen zum Objekt wenden Sie sich bitte an den Datenpartner.
Beteiligte
- Uhlmann, Lars Heinz
- Dadgar, Mohammad
- Müller, Martina
- Herrig, Tim
- Bergs, Thomas
- Universitätsbibliothek der RWTH Aachen
Entstanden
- 2024
Ähnliche Objekte (12)
Numerical analysis of the load paths and the resulting damage evolution during deep drawing of dual-phase steel
Influence of process parameters and process set-up on damage evolution during stretch drawing of u-shaped profiles
Effects of machine hammer peening on case-hardened 16MnCr5 gear analogue shafts
Mechanical Surface Treatment of Cold-Extruded Workpieces
Novel approach for reducing thinning during forming of foil metal
Chevron cracking during full forward impact extrusion of aluminum alloy EN AW 7075 in dependence of heat treatment condition and tribological system
Influences of Machine Hammer Peening on Inconel 718 Workpieces Manufactured by Wire-based Laser Metal Deposition
Thermomechanical modeling of the shearing process during fine blanking of quenched and tempered steel
A study on abrasive waterjet multi-stage machining of ceramics
A Model Calculation of CO2 Emissions Saving Potential for Fine Blanking of Inductively Heated Sheet Metal with Comparison of the Product Variants
Modification of the surface integrity of powder metallurgically produced S390 via deep rolling
Fine Blanking Limits of Manganese-Boron-Steel in Fine Blanking Compared to Tempered Steel with Variation of Sheet Metal Temperature
Numerical analysis of the load paths and the resulting damage evolution during deep drawing of dual-phase steel
Influence of process parameters and process set-up on damage evolution during stretch drawing of u-shaped profiles
Effects of machine hammer peening on case-hardened 16MnCr5 gear analogue shafts
Mechanical Surface Treatment of Cold-Extruded Workpieces
Novel approach for reducing thinning during forming of foil metal
Chevron cracking during full forward impact extrusion of aluminum alloy EN AW 7075 in dependence of heat treatment condition and tribological system
Influences of Machine Hammer Peening on Inconel 718 Workpieces Manufactured by Wire-based Laser Metal Deposition
Thermomechanical modeling of the shearing process during fine blanking of quenched and tempered steel
A study on abrasive waterjet multi-stage machining of ceramics
A Model Calculation of CO2 Emissions Saving Potential for Fine Blanking of Inductively Heated Sheet Metal with Comparison of the Product Variants
Modification of the surface integrity of powder metallurgically produced S390 via deep rolling
Fine Blanking Limits of Manganese-Boron-Steel in Fine Blanking Compared to Tempered Steel with Variation of Sheet Metal Temperature
Numerical analysis of the load paths and the resulting damage evolution during deep drawing of dual-phase steel
Influence of process parameters and process set-up on damage evolution during stretch drawing of u-shaped profiles
Effects of machine hammer peening on case-hardened 16MnCr5 gear analogue shafts
Mechanical Surface Treatment of Cold-Extruded Workpieces
Novel approach for reducing thinning during forming of foil metal
Chevron cracking during full forward impact extrusion of aluminum alloy EN AW 7075 in dependence of heat treatment condition and tribological system
Influences of Machine Hammer Peening on Inconel 718 Workpieces Manufactured by Wire-based Laser Metal Deposition
Thermomechanical modeling of the shearing process during fine blanking of quenched and tempered steel
A study on abrasive waterjet multi-stage machining of ceramics
A Model Calculation of CO2 Emissions Saving Potential for Fine Blanking of Inductively Heated Sheet Metal with Comparison of the Product Variants
Modification of the surface integrity of powder metallurgically produced S390 via deep rolling