Analysis of the Processing‐Pressure Dependent Refractive Index of Polycarbonate by Transmission Measurements of Glass‐Filled Specimen
- Location
-
Deutsche Nationalbibliothek Frankfurt am Main
- Extent
-
Online-Ressource
- Language
-
Englisch
- Bibliographic citation
-
In: Polymer Engineering and Science 60.3 (2020): S. 512-516.
- Event
-
Veröffentlichung
- (where)
-
Erlangen
- (who)
-
Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
- (when)
-
2020
- Creator
-
Roth, Benedikt
Wildner, Wolfgang
Drummer, Dietmar
- DOI
-
10.1002/pen.25306
- URN
-
urn:nbn:de:bvb:29-opus4-153499
- Rights
-
Der Zugriff auf das Objekt ist unbeschränkt möglich.
- Last update
-
15.08.2025, 7:32 AM CEST
Data provider
This object is provided by:
Deutsche Nationalbibliothek. If you have any questions about the object, please contact the data provider.
Deutsche Nationalbibliothek. If you have any questions about the object, please contact the data provider.
Associated
- Roth, Benedikt
- Wildner, Wolfgang
- Drummer, Dietmar
- Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Time of origin
- 2020
Other Objects (12)
Light scattering of glass-particle filled matrices with similar refractive index
Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions
Thermal Conductivity of Aluminosilicate- and Aluminum Oxide-Filled Thermosets for Injection Molding: Effect of Filler Content, Filler Size and Filler Geometry
Test Rig for the In Situ Measurement of the Elastic Tooth Deflection of Plastic Gears
Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts
Infiltration Behavior of Thermosets for Use in a Combined Selective Laser Sintering Process of Polymers
Influence of Filler Content and Filler Size on the Curing Kinetics of an Epoxy Resin
Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics
Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets
Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
The Impact of β-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives
Variation of the Pole Length in Pole-Oriented Bonded Rings due to the Location and Number of Injection Points
Light scattering of glass-particle filled matrices with similar refractive index
Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions
Thermal Conductivity of Aluminosilicate- and Aluminum Oxide-Filled Thermosets for Injection Molding: Effect of Filler Content, Filler Size and Filler Geometry
Test Rig for the In Situ Measurement of the Elastic Tooth Deflection of Plastic Gears
Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts
Infiltration Behavior of Thermosets for Use in a Combined Selective Laser Sintering Process of Polymers
Influence of Filler Content and Filler Size on the Curing Kinetics of an Epoxy Resin
Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics
Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets
Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
The Impact of β-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives
Variation of the Pole Length in Pole-Oriented Bonded Rings due to the Location and Number of Injection Points
Light scattering of glass-particle filled matrices with similar refractive index
Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions
Thermal Conductivity of Aluminosilicate- and Aluminum Oxide-Filled Thermosets for Injection Molding: Effect of Filler Content, Filler Size and Filler Geometry
Test Rig for the In Situ Measurement of the Elastic Tooth Deflection of Plastic Gears
Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts
Infiltration Behavior of Thermosets for Use in a Combined Selective Laser Sintering Process of Polymers
Influence of Filler Content and Filler Size on the Curing Kinetics of an Epoxy Resin
Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics
Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets
Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
The Impact of β-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives